Jason NikasLive FPGA Lab

Parallel Computer Architecture

Our own 32-core RISC-V GPGPU, designed in Verilog and running on a real FPGA.

9Course grade

RISC-V GPGPU

Our 32-core RISC-V GPGPU, running on a real FPGA

VerilogRISC-VVivado/VitisARM/ZynqCPythonJason NikasDimitrios TsiantosPanagiotis Nikolaos Tsogkas

A small processor for parallel work, built from 32 RISC-V cores that all run the same instruction at the same time. The Zynq chip’s ARM core sends it a program and data, and it runs the work on all 32 cores at once.

  • 2.38×faster than the ARM core on the same chip, for one n-body step
  • 32RISC-V cores running in lockstep
  • 1/17of the ARM core's clock speed
  • 88%of the FPGA's logic (LUTs) in use

What came next

  1. Done: Host controller over AXI
  2. Done: CLI for tests and synthesis
  3. Done: DDR memory controller
  4. Done: Graphics over HDMI
  5. In progress: Divergence, warp scheduling
  6. Next: Closer to 100 MHz

GPGPU v2

Our RISC-V GPGPU, now with DDR and HDMIIn progressWe're extending our RISC-V GPGPU from ECE338. It now reads and writes the board's DDR memory, grouping its lanes' accesses into bursts, and draws 1280×720 frames to an HDMI monitor, 60 a second. Next come branch divergence, warp scheduling and a clock closer to 100 MHz.

Tools

What this course's projects were built with. Pick one to see where else I used it.

Tap the picture to see it at full size